{"product_id":"milwaukee-mc810us-max-ph-tds-temp-monitor","title":"Milwaukee MC810US MAX pH\/TDS\/Temp Monitor","description":"\u003ch1\u003eMilwaukee MC810US MAX pH\/TDS\/Temp Monitor\u003c\/h1\u003e\n\u003ch1\u003e\u003cstrong\u003eAccurate. Simple. Reliable. 24\/7 pH\/TDS\/Temp Monitoring.\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eWhy Guard when you can Monitor! The Milwaukee MC810 MAX pH\/TDS\/Temp Monitor lets you monitor your pH\/TDS\/Temp levels 24\/7 automatically.\u003c\/p\u003e\n\u003ch2\u003eSummary\u003c\/h2\u003e\n\u003cp\u003eThe MC810 MAX Monitor automatically monitors and displays pH\/TDS\/Temp levels.  Just calibrate the parameters and let the Milwaukee MAX Monitor do the rest.\u003c\/p\u003e\n\u003cp\u003eThe Milwaukee MC810 MAX pH\/TDS\/Temp Monitor is preferred by people looking to know 24\/7 what their pH and nutrient levels are on an ongoing basis. Common uses are nutrient tanks, Hydroponics and aquariums.\u003c\/p\u003e\n\u003cp\u003eThe Milwaukee MAX pH\/TDS\/Temp Monitor offers:\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eAccuracy\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe Milwaukee MAX Monitor offers an accuracy to \u003cspan class=\"single-product-meta-item-value\"\u003e± \u003c\/span\u003e0.2 pH with two point manual calibration, TDS accuracy of \u003cspan\u003e±\u003c\/span\u003e2% Full Scale and \u003cspan\u003e±\u003c\/span\u003e0.5 °F (0.3C) temperature accuracy.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eAutomation\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eJust calibrate the parameters and begin to monitor 24\/7!\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eEasy installation\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe MC810 MAX pH\/TDS\/Temp Monitor comes with a complete mounting kit including a probe holder.\u003c\/p\u003e\n\u003ch2\u003eDesign features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFast easy to read current results with 3 large digital BACKLIT LCD readouts.\u003c\/li\u003e\n\u003cli\u003eAccurate to \u003cspan\u003e±\u003c\/span\u003e0.2 pH (0.0 pH to 12.0 pH).\u003c\/li\u003e\n\u003cli\u003eAccurate  \u003cspan\u003e±2% Full Scale TDS. \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExternal Switch atop the unit converts EC conductivity to TDS (ppm) using 0.5 or 0.7 conversion factor.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eSimple two-point pH calibration and one point TDS, for increased accuracy with manual trimmers for easy adjustment.\u003c\/li\u003e\n\u003cli\u003eGel-filled, double junction MA911B\/2 (included) lab grade pH electrode for low maintenance and high performance.\u003c\/li\u003e\n\u003cli\u003e6.5 feet probe cables for extra flexibility when testing.\u003c\/li\u003e\n\u003cli\u003e12 VDC power supply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUse and Care \u003c\/h2\u003e\n\u003cp\u003epH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eSensing bulb\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eReference junction\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH probe will no longer function.\u003c\/p\u003e\n\u003cp\u003eYou can extend the life of your pH electrode in the following ways.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.\u003c\/p\u003e\n\u003cp\u003eStore the pH probe in storage solution MA9015.  Only use tap water short-term if is not immediately available and \u003cstrong\u003eNEVER store in distilled Water (DI) or Reverse Osmosis (RO) water. This will damage the sensitivity of the probe.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis best way to store the probe is with the probe's cap filled with \u003cstrong\u003eMA9015\u003c\/strong\u003e \u003cstrong\u003eStorage Solution\u003c\/strong\u003e and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eResidue from the sample can impact the sensitivity of the sensing bulb and block the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking the probe in \u003cstrong\u003eMA9016 Cleaning Solution\u003c\/strong\u003e for about 20 minutes.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eCalibration\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe pH sensing bulbs become less sensitive over time so make sure that you are calibrating reguarly to keep your PRO pH controller accurate. \u003cspan\u003eAlso, calibrate after cleaning or a long period of storage.\u003c\/span\u003e\u003c\/p\u003e","brand":"Milwaukee Instruments","offers":[{"title":"Default Title","offer_id":67627246387354,"sku":null,"price":529.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/5215\/9130\/files\/Milwaukee_Instruments_MC810_Front_Probes__02866.webp?v=1790799668","url":"https:\/\/aquariumdepot.ca\/products\/milwaukee-mc810us-max-ph-tds-temp-monitor","provider":"Aquarium Depot","version":"1.0","type":"link"}